Key takeaways
- Gross to net: a welder on PLN 7,500 gross takes home roughly PLN 5,400; on PLN 10,000 gross, roughly PLN 7,100.
- Real savings: PLN 1,900–2,200 per month (EUR 440–510) is the honest middle figure after shared rent and normal living costs.
- Certification pays: MIG/MAG and TIG tickets typically add PLN 1,000–2,000 gross per month, and overtime can add another PLN 1,000–2,000 net.
- Shortage occupation: welders (spawacze) remain on Poland's shortage list in 2026, which keeps work-permit processing relatively fast — but the 2025-announced migration strategy means extra checks.
- Scam warning: no legitimate Polish employer asks a welder to pay for a work permit, a visa appointment, or a "guaranteed contract" before the permit exists. Ever.
In 2026, welder salary Poland averages PLN 7,200–8,500 gross per month (roughly EUR 1,690–2,000), which works out to PLN 5,200–6,100 net after ZUS and PIT. Entry-level welders start at PLN 5,500–6,500 gross, while certified MIG/MAG/TIG specialists in shipbuilding, automotive or industrial plants can earn PLN 10,000–12,000 gross. After rent and living costs, most foreign welders realistically save PLN 1,900–2,200 (EUR 440–510) per month.
That is the short answer. The rest of this article is the version I wish more candidates had read before they paid an agent: the actual gross-to-net math, what rent and groceries cost in Warsaw versus Wrocław versus Poznań, how overtime and a TIG certificate move your take-home pay, and the 2026 work permit and Type D visa path for welders from Bangladesh, India, Nepal and other non-EU countries. I have recruited and placed welders into Polish plants since the pre-pandemic boom, and the numbers below are the ones we use when we sit down with a candidate and a calculator.
Last verified: November 2026. Wages, living costs, exchange rates and visa rules change — sometimes mid-year. Treat every figure here as an indicative estimate to plan with, then confirm the final number with the employer's written offer, the Zakład Ubezpieczeń Społecznych (ZUS), and the Polish embassy or consulate in your country before you pay anyone a single taka or rupee.
Key takeaways
- Gross to net: a welder on PLN 7,500 gross takes home roughly PLN 5,400; on PLN 10,000 gross, roughly PLN 7,100.
- Real savings: PLN 1,900–2,200 per month (EUR 440–510) is the honest middle figure after shared rent and normal living costs.
- Certification pays: MIG/MAG and TIG tickets typically add PLN 1,000–2,000 gross per month, and overtime can add another PLN 1,000–2,000 net.
- Shortage occupation: welders (spawacze) remain on Poland's shortage list in 2026, which keeps work-permit processing relatively fast — but the 2025-announced migration strategy means extra checks.
- Scam warning: no legitimate Polish employer asks a welder to pay for a work permit, a visa appointment, or a "guaranteed contract" before the permit exists. Ever.
How much does a welder earn in Poland in 2026?
Average gross welder pay in Poland sits at PLN 7,200–8,500 per month in 2026, or about EUR 1,690–2,000 at the November 2026 rate of roughly 1 EUR = 4.30 PLN. That range is my estimate built from GUS wage data for the metalworking and manufacturing sectors, current recruitment-agency job listings, and the offers I see crossing desks for shipyard and automotive work.
The spread is wide because "welder" covers everything from a helper with a basic MMA ticket to a coded TIG pipe welder who can pass a radiography test. Here is how the market actually breaks down:
| Level / sector | Gross monthly (PLN) | Gross monthly (EUR, est.) | Typical locations |
|---|---|---|---|
| Entry-level, basic certificate | 5,500–6,500 | 1,280–1,510 | Anywhere; often via agency |
| Experienced MIG/MAG welder | 7,000–8,500 | 1,630–1,980 | Wrocław, Poznań, Katowice |
| Certified TIG / industrial specialist | 10,000–12,000 | 2,330–2,790 | Gdańsk, Szczecin shipyards |
| Minimum wage (legal floor, 2026) | 4,806 | ≈1,118 | Nationwide |
Poland's 2026 minimum wage is PLN 4,806 gross per month (PLN 31.40/hour), up from PLN 4,666 in 2025. That is the legal floor for unskilled work, but in practice almost no welding job advertises at the minimum — employers know they cannot fill a MIG/MAG role at that rate. If you see a "welder" offer at exactly minimum wage with no certificate requirement, it is usually a general labourer role with a welder title attached.
Pay also tracks the industrial map. Shipbuilding in Gdańsk and Szczecin pays a premium for coded welders because the work is classed and inspected. The Wrocław and Poznań automotive clusters pay well for production-line MIG/MAG welders on shift systems. Warsaw and Kraków construction sites pay decent rates but often through subcontractors, which is where paperwork problems creep in.
One caution I give every candidate: the PLN/EUR rate moves. As of November 2026 it is around 1 EUR = 4.30 PLN and 1 USD = 3.95 PLN — an estimate, so check the National Bank of Poland (NBP) mid-rate on the day you sign. A 5% swing changes your euro savings by roughly the same amount.
What is the net salary of a welder in Poland after tax and ZUS?
A welder on PLN 7,500 gross takes home about PLN 5,400 net; on PLN 10,000 gross, about PLN 7,100 net. The gap between gross and net comes from three deductions: ZUS social contributions (roughly 13.71% of gross for an employee), a 9% health insurance contribution, and PIT income tax at 12% up to PLN 120,000 of annual income, then 32% above.
Two things soften the hit. First, the PLN 30,000 annual tax-free allowance (kwota wolna) reduces PIT for lower and middle earners — it is why a PLN 7,500 gross salary pays less PIT than a flat 12% would suggest. Second, the employee cost deductions (koszty uzyskania przychodu) shave a little more off the taxable base. The 32% bracket only matters if you are a very senior coded welder doing heavy overtime, or on a supervisory contract.
Here is the gross-to-net table I use in briefings. These are estimates for a standard employment contract (umowa o pracę), not a B2B or agency contract, which are calculated differently:
| Gross monthly (PLN) | ZUS + health (approx.) | PIT (approx.) | Net monthly (PLN) | Net (EUR, est.) |
|---|---|---|---|---|
| 6,500 | ~1,050 | ~550 | ~4,900 | ~1,140 |
| 7,500 | ~1,210 | ~640 | ~5,650 | ~1,310 |
| 8,500 | ~1,370 | ~730 | ~6,400 | ~1,490 |
| 10,000 | ~1,610 | ~860 | ~7,530 | ~1,750 |
| 12,000 | ~1,930 | ~1,030 | ~9,040 | ~2,100 |
Note: these are rounded estimates for planning. Your actual net depends on your tax office (Urząd Skarbowy) declaration, any reliefs you claim, and whether your employer uses the standard or increased employee costs. Always check your first payslip against the official ZUS and PIT rules.
If you are coming from Bangladesh or India, one practical point: the net figure on your Polish payslip is what lands in your Polish bank account, but what you can actually send home depends on the exchange rate and transfer fees. A PLN 5,400 net salary at 4.30 PLN/EUR is EUR 1,256 before any transfer cost. Use a bank or licensed transfer service with a transparent rate — not an informal agent.
What is the cost of living in Poland for a welder in 2026?
For a single worker, monthly living costs excluding rent are roughly PLN 1,800–2,500 (EUR 420–580) in 2026 — food, transport, utilities, phone call and a modest amount of eating out. Rent for a shared room runs PLN 1,200–1,800 in mid-sized cities like Wrocław or Poznań, and PLN 1,800–2,500 in Warsaw or Kraków. Poland is still about 30–40% cheaper than Germany for day-to-day living, but the gap has narrowed with inflation.
City choice is the single biggest lever on your savings. Here is the comparison I give candidates, with rent and living costs as estimates for a single person in a shared flat in late 2026:
| City | Shared room rent (PLN) | Living costs excl. rent (PLN) | Total monthly (PLN) | Total (EUR, est.) |
|---|---|---|---|---|
| Warsaw | 1,800–2,500 | 2,200–2,600 | 4,000–5,100 | 930–1,190 |
| Kraków | 1,700–2,300 | 2,000–2,500 | 3,700–4,800 | 860–1,120 |
| Wrocław | 1,400–1,900 | 1,900–2,400 | 3,300–4,300 | 770–1,000 |
| Poznań | 1,300–1,800 | 1,800–2,300 | 3,100–4,100 | 720–950 |
| Gdańsk | 1,500–2,000 | 1,900–2,400 | 3,400–4,400 | 790–1,020 |
| Katowice | 1,200–1,700 | 1,800–2,200 | 3,000–3,900 | 700–910 |
A realistic monthly budget for a welder sharing a flat in Wrocław looks like this: room PLN 1,500, groceries PLN 900–1,100, transport pass PLN 120–160, phone and internet PLN 60–90, utilities share PLN 250–400, eating out and incidentals PLN 300–500. That lands around PLN 3,300–3,900 total — which is why the PLN 1,900–2,200 savings figure is believable but not automatic. If you rent alone in Warsaw and eat out often, you can save nothing on a PLN 7,500 gross salary.
How much can a welder save per month in Poland in 2026?
Worked example: PLN 7,500 gross → about PLN 5,400 net; shared room PLN 1,500; living costs PLN 2,000; that leaves PLN 1,900 saved. A careful welder in a mid-sized city with a cheaper room can push that to PLN 2,200–2,500. A Warsaw renter on the same salary saves less — often under PLN 1,200.
Overtime is the other lever. Polish law sets overtime at 1.5x the normal rate for the first two hours and 2x thereafter (on top of the base, depending on how the employer structures the equivalent time off). Many welders in shipbuilding and automotive work 10–12 hour shifts, and that pattern typically adds PLN 1,000–2,000 net per month. It is real money — but it is also why welders burn out. I have seen good welders leave after eight months because they took every Saturday for a year.
| Scenario | Net monthly (PLN) | Costs (PLN) | Savings (PLN) | Savings (EUR, est.) |
|---|---|---|---|---|
| Entry-level, Wrocław shared flat | 4,900 | 3,300 | 1,600 | ~370 |
| Average welder, Poznań shared flat | 5,650 | 3,500 | 2,150 | ~500 |
| Certified TIG, Gdańsk, with overtime | 8,500 | 3,800 | 4,700 | ~1,090 |
| Average welder, Warsaw single flat | 5,650 | 5,000 | 650 | ~150 |
So the honest answer to "how much can I save?" is: PLN 1,900–2,200 is the realistic middle, not the floor and not the ceiling. Your city, your rent arrangement, your overtime and your certificate decide the rest.
Is welding a shortage occupation in Poland in 2026?
Yes. Welders (spawacze) remain on Poland's shortage occupation list in 2026, which is why work-permit processing for welding roles is generally faster than for occupations with a surplus of local candidates. The Ministry of Family and Social Policy publishes the shortage-occupation barometer, and welding sits firmly in the deficit category — especially coded MIG/MAG and TIG welders.
Demand is concentrated in four clusters: shipbuilding in Gdańsk and Szczecin, automotive in Wrocław and Poznań, construction in Warsaw and Kraków, and general machinery across Silesia. Employers in these sectors routinely tell me they cannot fill coded-welder seats from the local market alone.
One caveat for 2026: the migration strategy announced in 2025 may tighten work-visa issuance for non-EU workers. Welders keep priority treatment because they are on the shortage list, but "priority" does not mean "automatic." Expect more document checks and longer queues at some consulates. Apply early, and do not let an agent promise you a fast-track that does not exist.
Can a foreign welder from Bangladesh or India get a work visa for Poland in 2026?
Yes. Welders with recognised vocational qualifications can apply for a Type D work visa, and the employer must first obtain a work permit (zezwolenie na pracę), typically issued for up to three years. Under the Poland–Bangladesh and Poland–India bilateral arrangements as they stand in 2026, qualified welders have a documented route. Visa processing usually takes 15–30 days after a complete application — but that is the consulate's decision clock, not the total time from job offer to boarding pass.
The realistic sequence, step by step:
- Secure a genuine job offer with a written contract stating gross salary, hours, accommodation and whether the employer covers the permit fee. Cross-check the employer on the KRS/CEIDG register.
- Employer files the work permit with the voivodeship office (urząd wojewódzki). This includes the labour-market test or the shortage-occupation route.
- You apply for the Type D visa at the Polish embassy or consulate in your country, with the permit, contract, passport, welding certificates, health insurance, proof of accommodation and the visa fee.
- Travel and register your address (meldunek) within the legal deadline.
- Apply for the residence card (karta pobytu) before your visa or visa-free stay expires.
The 2026 migration strategy may add extra verification steps — biometrics, employer inspections, or additional document checks. That is another reason to apply early and to use a licensed agency (one on the official agencja zatrudnienia register), not a "friend of a friend" who asks for cash up front.
Scam warning, and I mean this: no legitimate Polish employer or licensed agency asks a welder to pay for the work permit, the visa appointment, or a "guaranteed contract" before the permit exists. If someone shows you a permit with a different employer's name, a salary far above the table above, or asks for payment by mobile transfer to a personal account — walk away. Verify the employer's NIP and REGON, and check the agency against the official register.
What qualifications do I need to work as a welder in Poland?
You need a recognised welding certificate — MIG/MAG, TIG or MMA — ideally issued against PN-EN ISO 9606 (the welder qualification standard) or an equivalent international scheme. Polish employers also recognise the magister spawalnictwa (welding engineer/inspector) qualification for supervisory roles, but for a welder's seat the practical ticket is what matters.
Vocational training or documented work experience helps, and many employers will run a practical test on the floor before confirming the offer. Basic Polish or English is useful; larger factories often use English on the floor, but safety briefings may be in Polish. BHP (health and safety) training is mandatory and usually arranged by the employer.
Certification upgrades pay. A MIG/MAG or TIG certificate typically adds PLN 1,000–2,000 gross per month versus an uncertified helper, and a coded TIG ticket for shipyard or pressure-vessel work can push you into the PLN 10,000–12,000 band.
How does welder salary in Poland compare to Germany in 2026?
Germany pays more gross — a welder there might earn EUR 2,500–3,000 net per month versus Poland's roughly EUR 1,300–1,750 net — but Germany's rent, tax and social contributions are higher, and the gap in savings is narrower than the gap in gross pay. Poland's advantage is lower living costs and a faster, cheaper permit route for non-EU welders; Germany's advantage is higher absolute earnings and a larger industrial base.
| Metric (2026, estimate) | Poland | Germany |
|---|---|---|
| Average welder net monthly | PLN 5,200–6,100 (≈ EUR 1,210–1,420) | ≈ EUR 2,500–3,000 |
| Shared room rent | PLN 1,200–1,800 (EUR 280–420) | EUR 500–800 |
| Living costs excl. rent | PLN 1,800–2,500 (EUR 420–580) | EUR 700–1,000 |
| Realistic monthly savings | PLN 1,900–2,200 (EUR 440–510) | EUR 900–1,400 |
| Work-permit route for non-EU | Type D visa + work permit, shortage occupation | EU Blue Card / skilled-worker visa, stricter recognition |
My honest read: if your goal is maximum euros saved per year, Germany wins on paper. If your goal is a realistic, lower-cost entry into the EU labour market with a faster permit and a strong chance of overtime, Poland is often the better first step — and welders who prove themselves in Gdańsk or Wrocław frequently move west later with a track record and a certificate that travel.
FAQ
How much does a welder earn in Poland per month in 2026?
About PLN 7,200–8,500 gross per month (EUR 1,690–2,000), or PLN 5,200–6,100 net after ZUS and PIT. Entry-level welders earn PLN 5,500–6,500 gross; certified MIG/MAG/TIG specialists in shipbuilding or automotive earn PLN 10,000–12,000 gross.
What is the net salary of a welder in Poland after tax and ZUS?
A welder on PLN 7,500 gross takes home roughly PLN 5,400 net; on PLN 10,000 gross, roughly PLN 7,100 net. Employees pay about 13.71% ZUS social contributions, a 9% health contribution, and PIT at 12% up to PLN 120,000 annual income (32% above), with a PLN 30,000 tax-free allowance.
Can a foreign welder from Bangladesh or India get a work visa for Poland in 2026?
Yes. Welders with recognised vocational qualifications can apply for a Type D work visa after the employer obtains a work permit (zezwolenie na pracę), typically issued for up to three years. Processing usually takes 15–30 days after a complete application. The 2026 migration strategy may add extra checks, so apply early and use a licensed agency.
What is the cost of living in Poland for a welder in 2026?
Excluding rent, about PLN 1,800–2,500 (EUR 420–580) per month for food, transport, utilities and phone. A shared room costs PLN 1,200–1,800 in Wrocław or Poznań, and PLN 1,800–2,500 in Warsaw or Kraków.
How much can a welder save per month in Poland in 2026?
Realistically PLN 1,900–2,200 (EUR 440–510) after shared rent and normal living costs. Frugal welders in mid-sized cities can save PLN 2,200–2,500; Warsaw renters save less. Overtime adds PLN 1,000–2,000 net per month.
Is welding a shortage occupation in Poland in 2026?
Yes. Welders (spawacze) remain on Poland's shortage occupation list in 2026, which speeds up work-permit processing. Demand is highest in shipbuilding (Gdańsk, Szczecin), automotive (Wrocław, Poznań), construction (Warsaw, Kraków) and machinery.
What qualifications do I need to work as a welder in Poland?
A recognised welding certificate (MIG/MAG, TIG or MMA) against PN-EN ISO 9606 or an equivalent scheme, vocational training or documented experience, basic Polish or English, and mandatory BHP health-and-safety training (usually arranged by the employer).
How does welder salary in Poland compare to Germany in 2026?
Germany pays more gross — roughly EUR 2,500–3,000 net per month versus Poland's PLN 5,200–6,100 (about EUR 1,210–1,420) — but Germany's rent and taxes are higher, so the savings gap is narrower than the gross-pay gap. Poland offers a faster, cheaper permit route for non-EU welders.
Last verified: November 2026. Wages, living costs, exchange rates and visa rules change. Confirm every figure with the official source — GUS, ZUS, NBP, Eurostat, and the Polish Ministry of Family and Social Policy — or with the Polish embassy in your country before you travel or pay anyone.
Frequently asked questions
How much does a welder earn in Poland per month in 2026?
About PLN 7,200–8,500 gross per month (EUR 1,690–2,000), or PLN 5,200–6,100 net after ZUS and PIT. Entry-level welders earn PLN 5,500–6,500 gross; certified MIG/MAG/TIG specialists in shipbuilding or automotive earn PLN 10,000–12,000 gross.
What is the net salary of a welder in Poland after tax and ZUS?
A welder on PLN 7,500 gross takes home roughly PLN 5,400 net; on PLN 10,000 gross, roughly PLN 7,100 net. Employees pay about 13.71% ZUS social contributions, a 9% health contribution, and PIT at 12% up to PLN 120,000 annual income (32% above), with a PLN 30,000 tax-free allowance.
Can a foreign welder from Bangladesh or India get a work visa for Poland in 2026?
Yes. Welders with recognised vocational qualifications can apply for a Type D work visa after the employer obtains a work permit (zezwolenie na pracę), typically issued for up to three years. Processing usually takes 15–30 days after a complete application. The 2026 migration strategy may add extra checks, so apply early and use a licensed agency.
What is the cost of living in Poland for a welder in 2026?
Excluding rent, about PLN 1,800–2,500 (EUR 420–580) per month for food, transport, utilities and phone. A shared room costs PLN 1,200–1,800 in Wrocław or Poznań, and PLN 1,800–2,500 in Warsaw or Kraków.
How much can a welder save per month in Poland in 2026?
Realistically PLN 1,900–2,200 (EUR 440–510) after shared rent and normal living costs. Frugal welders in mid-sized cities can save PLN 2,200–2,500; Warsaw renters save less. Overtime adds PLN 1,000–2,000 net per month.
Is welding a shortage occupation in Poland in 2026?
Yes. Welders (spawacze) remain on Poland's shortage occupation list in 2026, which speeds up work-permit processing. Demand is highest in shipbuilding (Gdańsk, Szczecin), automotive (Wrocław, Poznań), construction (Warsaw, Kraków) and machinery.
What qualifications do I need to work as a welder in Poland?
A recognised welding certificate (MIG/MAG, TIG or MMA) against PN-EN ISO 9606 or an equivalent scheme, vocational training or documented experience, basic Polish or English, and mandatory BHP health-and-safety training (usually arranged by the employer).
How does welder salary in Poland compare to Germany in 2026?
Germany pays more gross — roughly EUR 2,500–3,000 net per month versus Poland's PLN 5,200–6,100 (about EUR 1,210–1,420) — but Germany's rent and taxes are higher, so the savings gap is narrower than the gross-pay gap. Poland offers a faster, cheaper permit route for non-EU welders.
